1.5L REVOTORQ ENGINE 153 13. Apply sealant to the cover as shown. 14. Install the crankshaft oil seal cover. 15. Fit the crankshaft oil seal. SPECIAL TOOL Drift crankshaft rear cover oil seal -: 2702 5890 06 08 iv. FITMENT OF CYLINDER HEAD ON CYLINDER BLOCK 1. Place the Cylinder Head gasket as shown. NOTE Ensure that the "TOP" mark on the gasket is facing towards the intake manifold side of the block. Refer ‘Assembly Clearances’ section for selection table.
RkJQdWJsaXNoZXIy MTIwNTUz