1.5L REVOTORQ ENGINE 152 6. Install all the lower main bearing half. 7. Tighten main bearing cap mounting bolts gently and uniformly in order as shown to specified torque 8. Apply oil on piston, piston rings, cylinder bore and bearing shells. 9. Push the piston assemblies into the cylinders using mallet. NOTE Ensure that the arrow mark on the piston crown is towards the exhaust manifold side and facing at Engine Front of the block. 10. Verify serial numbers on connecting rod bearing caps and connecting rods. 11. Install the connecting rod bearing shells on the crankshaft. 12. Turn the Crankshaft to adjust the position of the pistons and install the connecting rod bearing cap mounting bolts.
RkJQdWJsaXNoZXIy MTIwNTUz