1.5L REVOTORQ ENGINE 154 2. Install cylinder head and tighten the mounting bolts to 5 Kg-m and angular torque of 180˚ in the specified sequence. 3. Install camshaft and bearing caps ensuring that punched cylinder head number is matched near “A” mount bracket, its location number and identifying intake or exhaust camshaft to avoid damage to cylinder head. NOTE For example: 3584 I 3 means cylinder head number is 3584, I for inlet cam (E for exhaust cam), 3 is cap location number. 4. Install bearing caps by tightening the mounting bolts in proper sequence. 5. Install the camshaft bearing cap on the front end. 6. Install oil seal of cam shaft using special tool. SPECIAL TOOL Drift (Camshaft Oil Seal) -:2654 5890 05 08
RkJQdWJsaXNoZXIy MTIwNTUz