CONDENSER I. REMOVAL 1. Remove the radiator (Refer Radiator removal pro-cess). 2. Loosen and remove the 4 condenser mounting bolts on the radiator and separate out the condenser. FITMENT Follow the reverse procedure of removal. J. CHILLER UNIT REMOVAL Type – Plate type chiller 1. Open the bonnet of the vehicle. 2. Remove the fuse box for better access. 3. Remove Aux Battery negative terminal and Put masking tape on Aux Battery negative terminal & cable. 4. Discharge the refrigerant using standard recovering equipment. (Refer maintenance section.) 5.Drain coolant from BCS system by disconnecting coolant hose from HV battery. CAUTION Never leave the condenser lines open immediately cover them with caps, otherwise the desiccant which is in-built in the condenser may absorb the moisture from surrounding air and get contaminated. FATC 65
RkJQdWJsaXNoZXIy MTIwNTUz