G. HVAC UNIT REMOVAL 1. Discharge the refrigerant using standard recovering equipment. 2. Remove dashboard with cross car beam assembly. (For procedure, refer dashboard removal with cross car beam in body section.) 3. Disconnect all electrical connections. 4. Loosen and remove nut and disconnect the inlet and outlet lines i.e. high pressure line and low pressure line and plug the ports. 5. Remove mountings and take out the HVAC unit. FITMENT For fitment follow the reverse procedure of removal. H. CONDENSER SEALING DUCT REMOVAL 1. Remove the bumper (Refer Body section). 2. Open the bonnet. 3. Remove horns from both ends. 4. Remove the push rivets from LH side. 5. Remove the push rivets from LH side. FITMENT Follow the reverse procedure of removal. WARNING The heater pipes contain hot coolant which may spill out when disconnected, even if the coolant is drained, so be careful while disconnecting them. Keep a suitable container below it to collect the coolant that will flow out. FATC 64
RkJQdWJsaXNoZXIy MTIwNTUz