12. Loosen & remove the mountings of I-VBAC Unit & take out the I - VBAC Unit. INSTALLATION 1. Place & align the I-VBAC unit with the mounting studs at appropriate places. 2. Mount & tighten the nuts of unit to specified torque (2.0 – 2.5) & sequence. 3. Connect the ECU harness connector & Motor connector. NOTE Proper care must be taken before removing the brake pipes from HCU; the HCU must be thoroughly cleaned to prevent dirt particles from falling into the ports of HCU or entering the brake pipes. NOTE I - VBAC UNIT is not serviceable. Complete Unit Need To Be Replaced In Case Of Failure. BRAKES_LR 45
RkJQdWJsaXNoZXIy MTIwNTUz