4. Remove battery tray. 5. Recover the AC gas from vehicle. 6. Disconnect the AC gas suction hose. 7. Loosen & remove the AC gas suction hose to compressor mounting to avoid damage. 8. Remove the hose pipe TMC reservoir to I - VBAC Unit. 9. Remove the brake pipes from the unit and plug the unit ports with suitable grommet. Identify the brake pipes going into and out of 10. the Hydraulic Control Unit (HCU) with tags so that reinstallation of the brake lines becomes easy. 11. Disconnect I - VBAC connector & Motor connector. NOTE Refer steps (i) and (ii) to disconnect I - VBAC Connector. (i) Press the unlock button and remove the lever from the lock and move towards unlocking position. (ii) Lock the lever to it is unlock position by pressing the lever till the Click sound is heard and remove the connector from unit. WARNING Never apply a 12V power source to any terminal of the ECU connector when it’s disconnected. BRAKES_LR 44
RkJQdWJsaXNoZXIy MTIwNTUz