Lower the twist beam along with bracket 19. Remove the twist beam cross bolt on both 20. sides Twist beam bush removal 21. Remove twist beam front pivot bush using 22. special tools as shown in below arrangement. INSTALLATION • 1. Install twist beam front pivot bush using special tools as shown in below arrangement. 2. Tighten the cross bolt of the twist beam. 3. Lift and properly position the twist beam along with bracket. 4. Tighten the four bolts of bracket on both sides. NOTE Apply soap water to the bush and the bore • of twist beam assembly before installation. of RTB on body to be done in preloading • condition. No jacking to be done on beam, avoid oil based lubricant while pushing the bushes in eye SUSPENSION_PETROL 43
RkJQdWJsaXNoZXIy MTIwNTUz