Detach the hand brake cable from the lever on 11. the trailing shoe by moving the lever towards the centre of the brake and removing the cable nipple from its location in the end of the lever. Disconnect the bundy pipe/Hose from wheel 15. cylinder. Remove bleed screw. Put rubber dust cap on to the bundy pipe to avoid brake fluid from spilling and contamination. Remove the rear sensor cable mountings on 13. the twist beam axle Disconnect the brake lines mounting on the 14. twist beam. Remove the stub axle and back plate along 16. with brake shoe assembly. Remove the shock absorber lower bolts and 17. coil springs. (Refer removal and refitment of shock absorber and coil springs) Loosen and remove the twist beam bracket 18. bolts on both sides. SUSPENSION_PETROL 42
RkJQdWJsaXNoZXIy MTIwNTUz