8. REAR BRAKE DRUM BEARING REMOVAL. Fit the special tool part no (2871 5890 4202) to the brake drum and pry out the bearing using press after removing the circlip over it Insert the new bearing to the brake drum using the bearing installer special tool part no (2871 5890 4202) as shown in the Figure. 10. Fit the circlip 9. REAR BRAKE DRUM BEARING FITMENT Remove the hand brake cable holder lock pin 12. from the back plate CAUTION Bearing removed from brake drum should • not be reused again. SUSPENSION_PETROL 41
RkJQdWJsaXNoZXIy MTIwNTUz