Connection between HCU and cable Harness 6. Remove the HCU gakset from the transmission housing. FITMENT (Install oil pan, filter and hydraulic control unit) 1. Place new HCU gasket on the housing of transmission. The two protruding features must fit into the housing. 2. Mount each connector (7 in total) of the internal cable harness in the correct counter connector of the HCU (Refer picture shown in remove procedure) CONNECTOR HCU (501568) MATCHING CONNECTOR ON CABLE (504089) ID NAME ID NAME CABLE COLOR 1 Direct acting solenoid (SV1) A X-502 Black/yellow 2 Pressure sensor (Brake) B X-401 Blue/white/pink 3 Pressure regulator (SV3) C X-303 Violet/gray 4 Pressure regulator (SV5) D X-301 Violet/yellow 5 Pressure regulator (SV4) E X-302 Violet/red 6 Pressure sensor (Clutch) F X-402 Blue/white/pink 7 Direct acting solenoid (SV2) G X-501 Red/green Dual Clutch Transmission (DCT) 63
RkJQdWJsaXNoZXIy MTIwNTUz