3. Mount the HCU onto the Transmission housing: take care for proper alignment of the 4 dowels: 2 towards the Transmission housing and 2 towards the Oil pump. 4. Manually turn the 9 bolt (indicated in circle) for at least two full rotations before using a tightening tool. 5. Tighten all bolts to the final torque level specified in the External Specification using a calibrated tightening tool. 6. Lubricate the O-ring on the Oil filter tube using transmission oil; 7. Mount the Oil filter tube into the suction port of the oil pump and press it further until stop 8. Place the Oil pan gasket onto the flange of the Transmission housing. 9. Mount the Oil pan onto the gasket and fix it with the 16 bolts Manually turn the bolts for at least two full 10. rotations before using a tightening tool. IDENTIFIC ATION OF BOLT DESCRIPTION QTY Blue circle Pan head screw with inner hexalobular - M6X75 4 Orange circle Flange bolt M6X65 4 Yellow circle Flange bolt M6x4 1 Dual Clutch Transmission (DCT) 64
RkJQdWJsaXNoZXIy MTIwNTUz