V. SPEED SENSORS REMOVAL 1. Disconnect the cable harness from the sensors and untighten the sensor bolt. 2.Remove the speed sensor from the transmission. FITMENT 1. Press the new sensor in the sensor hole. 2. Manually turn the bolt for at least two full rotations before using a tightening tool. TOOLS T-GH-1: Input shaft assembly tool Punch internal number T38778 T-GH-2: Output shaft assmbly tool Punch internal number T38779 NOTE The sequence is the same for the three speed sensors which are present on the transmission. NOTE Use some DT1 transmission oil to lubricate the sensor seal for easier assembly. Dual Clutch Transmission (DCT) 59
RkJQdWJsaXNoZXIy MTIwNTUz