3. Tighten the sensor bolt to the final torque level specified in the External Specification using a calibrated tightening tool. 4. Reconnect the cable to the sensor. 5. Push in the gray button once the connector is in place. VI. EXTERNAL CABLE HARNESS REMOVAL 1. Disconnect all sensor connectors: 3x speed sensor • 1x BLDC motor connector • 1x angle sensor • 1x TCU connector • 1x HCU circular connector • 2. Rotate the HCU circular connector to the transmission downwards to disconnect. TOOLS T-I-1: Speed sensor bolt bit Bit for Hexalobular E8 Dual Clutch Transmission (DCT) 60
RkJQdWJsaXNoZXIy MTIwNTUz