5. Assemble the lower ITG Bearing Cap with locating dowels. Ensure the NRV (Non return valve) in place inside lower ITG. 6. Place the camshafts to their respective location in such way that the cam lobes of first cylinder are opposite to each other as shown. 7. Assemble the ITG Bearing Cap Upper with the mounting fasteners. 8. Assemble the Cylinder Head cam cap bolts along with the washers, starting from the ends of the cylinder head and working inwards to the center. (Keep the arrow of cap in outward direction.) 9. Apply sealant as shown below. NOTE Cam lobes should not be pressing any • valves. Petrol Engine Ph-2 (CAFÉ)_DCT 150
RkJQdWJsaXNoZXIy MTIwNTUz