9. Assemble the RFF along with Hydraulic Lash Adjuster from the cylinder head as shown in below figure. Repeat the procedure for exhaust port, noting 10. the locations and components for each valve for proper reassembly. ASSEMBLY OF CYLINDER HEAD IV. 1. Place the cylinder head on the table. 2. Mount the cylinder head gasket over the block with locating dowel. 3. Assemble the cylinder head on the block. 4. Tighten the fasteners as per given sequence. NOTE To avoid damage to valve tips, do not rotate • the camshaft. CAUTION When assembling the camshaft, use care to • avoid damaging the bearing surfaces of the cylinder head and the camshaft. NOTE Match the gasket profile to Cylinder block • surface as shown in figure. Petrol Engine Ph-2 (CAFÉ)_DCT 149
RkJQdWJsaXNoZXIy MTIwNTUz