8. Apply oil on piston, piston rings, cylinder bore and bearing shells. 9. Push the piston assemblies into the cylinders using mallet. Verify serial numbers on connecting rod 10. bearing caps and connecting rods. Install the connecting rod bearing shells on the 11. crankshaft. Turn the Crankshaft to adjust the position of 12. the pistons and install the connecting rod bearing cap mounting bolts. Apply sealant to the cover as shown. 13. Install the crankshaft oil seal cover. 14. Fit the crankshaft oil seal. 15. NOTE Ensure that the arrow mark on the piston • crown is towards the exhaust manifold side and facing at Engine Front of the block. SPECIAL TOOL Drift crankshaft rear cover oil seal -: 2702 • 5890 06 08 Diesel Engine Ph-2 (CAFÉ) 169
RkJQdWJsaXNoZXIy MTIwNTUz