FITMENT OF CYLINDER HEAD ON IV. CYLINDER BLOCK 1. Place the Cylinder Head gasket as shown. Refer ‘Assembly Clearances’ section for selection table. 2. Install cylinder head and tighten the mounting bolts to 5 Kg-m and angular torque of 180° in the specified sequence. 3. Install camshaft and bearing caps ensuring that punched cylinder head number is matched near “A” mount bracket, its location number and identifying intake or exhaust camshaft to avoid damage to cylinder head. NOTE Ensure that the “TOP” mark on the gasket is • facing towards the intake manifold side of the block. Diesel Engine Ph-2 (CAFÉ) 170
RkJQdWJsaXNoZXIy MTIwNTUz