5. Remove the door handle switch with wire harness. 6. Similarly follow the above steps for other door handle switches on the door. REFITMENT For refitment follow the procedure in reverse. K. TAILGATE HANDLE SWITCH REMOVAL 1. Disconnect the battery. Remove the Tailgate trim assembly. (Refer 2. Tailgate trim Removal Procedure in the Body Section). 3. Disconnect the electrical connection to the tailgate switch. 4. Remove wiring harness routine from tail gate pull cup bracket. 5. Remove the Tail gate pull cup bracket mounting screw and remove the bracket. NOTE 1. Ensure that door handle switch connector is fitted tightly and properly. 2. After replacing the door handle switch, check vehicle locking/ unlocking state changes by pressing the replaced door handle switch. 3. The smart key shall be present during door handle switch press. 4. Connect the Diagnostics tool and clear the DTCs. ELECLTRICAL 67
RkJQdWJsaXNoZXIy MTIwNTUz