4. Remove four screws to take out the steering wheel switches with the bezel. 5. Remove the wiring harness & steering wheel switches with bezel assembly. INSTALLATION 1. Assemble the new steering switches with wiring harness. 2. Locate the new steering switches with bezel on the steering wheel. 3. Tight the mounting screws (4 Nos) of the switches. Tightening torque: 0.4 TO 0.6 Nm. 4. Assemble the Paddle shifter (if equipped) & Tight the mounting screw (2 Nos). Tightening torque: 0.5- 0.6 Nm. 5. Fit the steering wheel assembly. Refer “Removal & Re-fitment of steering wheel” from Steering Section. J. DOOR HANDLE SWITCH REMOVAL & INSTALLATION 1. Disconnect the battery. Remove the Door Handle. (Refer Door Handle 2. Removal Procedure in the Body Section). 3. Unscrew the door handle cover with dedicated screw panel. 4. Remove door handle switch wire harness fitted in the handle. NOTE There will be different combinations of LH & • RH steering wheel switch assembly for different functions based on vehicle feature list for different persona / variants. Switch main connector will be common for • all variants ELECLTRICAL 66
RkJQdWJsaXNoZXIy MTIwNTUz