6. Remove the door handle switch with wire harness. REFITMENT For re-fitment follow the procedure in reverse. L. I-CALL & B-CALL SWITCH LOCATION I-Call, B-Call switch mounted on the roof console. FUNCTION I-Call switch: This switch is used to connect 1. the related services when pressed. I-Call will connect you to TATA MOTORS Roadside assistance for Towing. Not for ambulance service. Red LED Indication: Red LED indicates the 2. fault or failure in I-Call / B-Call functionality. Green LED Indication: Green LED indicates 3. the status of ongoing I-Call or B-Call. B-Call (SOS) Switch: This switch is used to 4. connect the related services when pressed. BCall will connect you to towing and ambulance services. NOTE 1. Ensure that door handle switch connector is fitted tightly and properly. 2. After replacing the door handle switch, check vehicle locking/ unlocking state changes by pressing the replaced door handle switch. 3. The smart key shall be present during door handle switch press. 4. Connect the Diagnostics tool and clear the DTCs. ELECLTRICAL 68
RkJQdWJsaXNoZXIy MTIwNTUz