HV ELECTRICAL SYSTEM 62 10. Remove drive shaft by pulling disk brake and Take out drive shaft LH / RH from gearbox. (Drain oil before carrying out this process). 11. Loosen and Remove the mounting screw and take out the motor cover. 12. Remove the connector cable connected between 3in1 Assy. & E-Drive. 13. Disconnect the wiring harness of E Drive. 14. Remove of ground cables of E-drive. 15. Remove the Hose Pipe Charger out to Motor Inlet and drain coolant. 16. Collect the refrigerant using standard recovering equipment. 17. Remove the compressor. (Refer compressor removal section for removal process.) 18. Support Motor E-Drive from Bottom side using special Tool.
RkJQdWJsaXNoZXIy MTIwNTUz