HV ELECTRICAL SYSTEM 61 D. E-DRIVE REMOVAL 1. Refer Instructions for working on HV Components mention before starting work. 2. Loosen and Remove the mounting screws & nut of splashguard. 3. Loosen and Remove the screws & tree clips mounting of splashguard. 4. Remove Mud Liner RH. 5. Loosen & Remove the underbody cover mountings & take it out 6. Loosen and remove the mounting nut of tyre & take out (LH / RH side ) 7. Loosen and remove the boll joint bolt of lower arm to axle both LH & RH side. 8. Apply brake and remove drive shaft lock nut on both LH and RH side. 9. Drain the coolant and Remove the pump. (Refer coolant pump section for removal process).
RkJQdWJsaXNoZXIy MTIwNTUz