HV ELECTRICAL SYSTEM 63 19. Loosen and remove the mounting bolts of motor bracket support. 20. Loosen and remove the mounting bolts of motor bracket support. 21. Loosen and remove the mounting bolts of upper side motor bracket support. 22. Loosen and remove the mounting bolt on C- Mount Bracket. 23. Use special tool to keep E drive safely down take it out. Fitment Follow reverse procedure for assembly. 1. After connecting the LV battery , Start the vehicle and after 5 minutes if the coolant level drops below the max level then top up the coolant till max level. NOTE After filling the coolant, the coolant pump can be run through the service tool for the deaeration of coolant circuit. Or the vehicle can be cranked to run the pump, because in vehicle cranked state the pump operation starts in default speed which will in turn deaerate the circuit. 2. Connect the diagnostic tool to OBD connector. 3. Turn the IGN ON.
RkJQdWJsaXNoZXIy MTIwNTUz