FITMENT For fitment follow the reverse order of removal. Tighten the following fasteners to the recommended torque. RADIATOR FAN SHROUD REMOVAL • Drain the coolant and remove the Coolant tank. 1. (For procedure refer “Coolant Replacement” in Engine maintenance section) Disconnect the electrical connections to the 2. radiator fan. Remove the two fasteners to separate fan 3. shroud. Pull out the shroud from the top. 4. FITMENT For fitment slide the shroud into the mounts till it snaps at the top mounts. THERMOSTAT REMOVAL • Drain the coolant. (Refer “Coolant Replacement 1. Procedure). Access the thermostat from top by removing air 2. filter assembly. Remove the spring band clip and disconnect 3. the hose. Remove hose connection to auxiliary Tank. 4. Remove thermostat to inlet heater hose 5. connection. ENGINE 1.2L BSVI PHASE-2 109
RkJQdWJsaXNoZXIy MTIwNTUz