Loosen and remove the bolt and disconnect the 6. refrigerant outlet pipe to condenser. Remove front bumper. 7. Loosen and remove the splash guard fasteners 8. Loosen and remove the fasteners of radiator 9. bottom mounting member. Tilt the radiator inwards and down the radiator 10. and condenser assembly from the grommet on the top mounts, both LH and RH simultaneously. After removing the radiator and condenser 11. assembly out, separate the condenser from the radiator, by removing fasteners. CAUTION Never leave the condenser lines open immediately cover them with caps, otherwise the desiccant which is in-built in the condenser may absorb the moisture from surrounding air and get contaminated ENGINE 1.2L BSVI PHASE-2 108
RkJQdWJsaXNoZXIy MTIwNTUz