DRIVESHAFT AMT 11 10. Remove 3 allen bolt of intermediate shaft & take out Drive shaft from driver side/Engine side. 11. Remove Drive shaft from co-driver side. NOTE: Care should be taken not to damage driveshaft oil seal and its boots (do not use hammer). CAUTION: Do not pull drive shaft excessively as the plunge joint will come out of housing and damage the boot Pry. Plunge joint housing for taking out joint out of splines. Do not place the CV drive shaft on rough / uncleaned surfaces. This might damage the drive shaft boot. INSTALLATION: Follow the reverse procedure of removal. B. DRIVE SHAFT (LH / RH) REMOVAL (DIESEL VEHICEL) 1. Park vehicle on forepost. 2. Remove Assy. bottom shield mounting or stone guard. 3. Remove splash guard & also remove mud liner inner front LH & RH side. 4. Remove stone guard bracket Assy.
RkJQdWJsaXNoZXIy MTIwNTUz