DRIVESHAFT AMT 10 6. ON VEHICLE PROCEDURE A. DRIVE SHAFT (LH / RH) REMOVAL (PETROL VEHICEL) 1. Park vehicle on forepost. 2. Remove splash guard & also remove mud liner inner front LH side. 3. Remove four mountings & take out tyres on LH & RH side. 4. Drain the Transaxle oil by removing Drain Plug. 5. Remove earthing cable from gear box. 6. Remove stub axle ball joint Mounting & Loosen Lower Control Arm on LH & RH side. 7. Remove driveshaft lock nut LH& RH. 8. Remove ball joint (steering rack) from steering knuckle from both sides. 9. Remove vertical link mountings on suspension rod for both RH & LH sides.
RkJQdWJsaXNoZXIy MTIwNTUz