Transponder & CAN based Immobilizer (Continental) Part Replacement handling – Service Documentation TITLE : Immobilizer (Conti) Service Manual-Aria Eagle xxxx Date: 28-08-2015 Version: 0.1 Page: 19 of 25 Prepared : Amanulla Bugga Approved: Dinesh G Dodmane This specification is the exclusive property of Tata Motors Limited. Without their consent it may not be reproduced or given to third parties. The above specifications are subject to change and therefore suppliers are requested to refer the latest one. CONTROLLED COPY FOR RESTRICTED CIRCULATION § After total 6 keys (including one known key) are learnt, switch OFF & ON the ignition, for normal operation. Check operation of all the learned E-keys, as indicated below. § Checking of E-key: Tests vehicle with Immobilizer & New E-keys 1) Insert Original E-key in the SCL (Steering Column Lock) 2) The Immo Status lamp should be blinking, at ignition OFF 3) Turn on to IGN-ON position. 4) With properly learnt E-key, Immo Status lamp will go OFF (else refer troubleshooting section 3,4,5) Verify Immobilizer DTC & clear DTC Return back vehicle to customer, with No DTCs. Note: All available E keys needs to be learnt, as immobilizer removes all existing keys in its memory.
RkJQdWJsaXNoZXIy MTIwNTUz