Copyright © TATA MOTORS Ltd. This document must not be used in any w ay, such as copying and redistributing to third parties, w ithout the consent of author . SRS / Airbag ECU – DTC Troubleshooting Guide Vers ion: 14.0 Da te: 14-February-2017 Prepared by:Airbag COC Review & Approved by:Sanjeev VM Page: 227 of 549 DTC’s confirmation:- After rectification, ensure the following points using TML diagnostic tool before handing over to customer. a) Clear the DTC’s & make sure no DTC’s are present for Airbag system b) Check whether any new DTC’s are getting qualified for repeated cranking. c) Ensure the Airbag Warning Lamp Indication is continuously ON in Instrument Cluster for 4 seconds after Ignition ON d) Ensure the Airbag Warning Lamp Indication goes OFF after 4 seconds from Ignition ON. Circuit Schematic Diagram:- Schematic shown below for illustration Battery>>>>>Fuse>>>>Relay>>>>>>>Sensor/Actuator>>>>>ECU Component Location & Image:- PAD Indication is present in the Instrument cluster or in SBR display. Fig207:- PAD indication Connector Location:- The Chamber Coding & color are: Chamber Coding Color Chamber A D Blue Chamber B C Brown
RkJQdWJsaXNoZXIy MTIwNTUz