Copyright © TATA MOTORS Ltd. This document must not be used in any w ay, such as copying and redistributing to third parties, w ithout the consent of author. SRS / Airbag ECU – DTC Troubleshooting Guide Vers ion: 14.0 Da te: 14-February-2017 Prepared by:Airbag COC Review & Approved by:Sanjeev VM Page: 41 of 549 B0010-2B:- Passenger Frontal Stage 1 Deployment Control signal cross coupled Overview:- ISO Code B00102B Customer Symptom SRS Warning Lamp continuously ON in Instrument Cluster. Fault Effects (On Vehicle) Passenger Airbag deployment not guaranteed, if a crash happens Lamp Status (If Any) SRS Warning Lamp continuously ON in Instrument Cluster. Fault Detection Condition This fault gets logged if the signal of Passenger Airbag gets cross coupled with any other Firing loop terminal during Power ON. Normal Operating Condition No cross coupling should be present. Probable Trouble Area Related wiring Harness, connector or terminals Passenger Airbag Module Airbag Wiring Harness Airbag ECU Healing Condition Cross coupling should be removed & Ignition should be turned OFF & ON. Component Details:- Passenger Airbag Module:- It is fitted inside the dashboard in front of the co-driver or passenger seat which consists of a flexible fabric envelope or cushion designed to inflate rapidly during an accident. Airbag ECU:- It is fitted in the floor of central console in the car. The Airbag Elec tronic Control Unit (ECU) controls the deployment system to allow an appropriate igniting of the Airbags and belt pre-tensioners to restrain the Driver and passengers. Preliminary Checks:- 1. Check Battery Voltage (12 V & above) 2. Check for any faults in Airbag Warning Lamp indication in Instrument Cluster. 3. Ensure the proper locking of Airbag ECU wiring harness connectors in the vehicle by the locking sound. Trouble Shooting:-
RkJQdWJsaXNoZXIy MTIwNTUz