Q5/X451 FATC DTC Troubleshooting Data Version: 1.0 Date: 16-Oct-2018 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Author: ERC Page: 169 of 202 Trouble Shooting:- DTC’s confirmation: - After rectification, ensure the following points using TML diagnostic tool before handing over to customer. a) DTC should not be present in ECU memory. Component Location & Image: Connector Location: N.A Connector View & Information: - N.A Inspection Method: - N.A Is continuity Present? Yes No Is DTC Present? Yes No Stop 1 . Connect the TML Diagnostic Tool. 2 . Turn the Ignition ON 3 . Check the status of DTC’s (Memorized/Current) . Record the DTC & Clear 4 5 . Turn Ignition OFF & ON 6 . Verify If U2416 – 11U2 81 is present Replace CCH Stop In CAR temperature sensor should be present and in working condition IN-car Sensor
RkJQdWJsaXNoZXIy MTIwNTUz