Q5/X451 FATC DTC Troubleshooting Data Version: 1.0 Date: 16-Oct-2018 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Author: ERC Page: 155 of 202 Trouble Shooting:- DTC’s confirmation:- After rectification, ensure the following points before handing over the system to the customer 1) Replacement of ECU 2) Drive the vehicle on road and check the FATC Component Location & Image: - NA Connector Location: - Behind the CCM ECU Body. Connector View & Information: NA Inspection Method: - N/A Reset the ECU. Remove the power plug from ECU and reconnect after about 5 minutes Yes No IS DTC still present? Stop Replace the ECU. Is DTC Present? Yes No Stop . Connect the TML Diagnostic Tool. 1 . Turn the Ignition ON 2 . Check the status of DTC’s (Memorized/Current) 3 . Record the DTC & Clear 4 5 . Turn Ignition OFF & ON . Verify If 6 P0604 – 00 is present
RkJQdWJsaXNoZXIy MTIwNTUz