Q5/X451 FATC DTC Troubleshooting Data Version: 1.0 Date: 16-Oct-2018 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Author: ERC Page: 131 of 202 B1F39-23:- Fresh Air / Recirc Request Button -Signal Stuck Low Overview:- ISO Code B1F39 – 23 Customer Symptom Fresh Air / Recirc Request Button Button cannot be manually selected Fault Effects (On Vehicle) The Fresh Air / Recirc switch is stuck and air inlet door is not changing it state. Lamp Status (If Any) Manual recirc condition is over ridden by auto recirc condition except for HI/LO and defrost conditions. If Key Jam(Stuck) is cleared,RECIRC will be activated /deactivated with single RECIRC key press. Fault Detection Condition Fresh Air / Recirc Request Button -Signal Stuck Low Normal Operating Condition The Recirc request push button allows the user to manually choose the position of the air inlet door, as a manually selected two state function, the air inlet door will be either fresh air (Fresh) or in-cabin recirculation (Recirc). Probable Trouble Area Air inlet switch component failure. Healing Condition Check and lubricate switch, replace control panel Component Details: Fresh Air / Recirc switch Button is shown in above image. The user shall be able to choose the position of the air inlet door by pressing Fresh Air / Recirc Request Button. Preliminary Checks: Switch On the IGN & perform the following check. 1) Connect the Diagnostics tool & check the DTC fault code 2) If the fault code exists, refer the corrective actions
RkJQdWJsaXNoZXIy MTIwNTUz