Q5/X451 FATC DTC Troubleshooting Data Version: 1.0 Date: 16-Oct-2018 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Author: ERC Page: 10 of 202 DTC’s confirmation:- After rectification, ensure the following points by using TML diagnostic tool before handing over to customer. a) Physical check of temperature change when requested. b) Read ECU parameters sensor Solar Load Status. Component Location & Image:- Near Wind shield and on top of dash board. Connector View & Information: - Pin Details:- Inspection Method: - 1) If there is no continuity between the sensor connector & ECU connector then correct the wiring harness 2) If there is a continuity between the sensor signal and battery lines correct the wiring harness (wiring harness short to battery) Pin number Signal Name Signal Description A SolarSensSig Solar Sens(Sensor) Signal B SolarSensGnd Solar Sens(Sensor) Gnd
RkJQdWJsaXNoZXIy MTIwNTUz