{Osprey CCM} DTC Troubleshooting Data Version: 2.0 Date: 28-Jul-17 Author: ERC Page: 193 of 244 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Trouble Shooting:- Voltage fluctuates between 0V and 14V? A Yes Disconnect FATC ECU power supply connector. Check voltage b/w pin 32 & pin19. (Refer Connector View & Information) No Is DTC Present? Yes No Stop 1. Connect the TML Diagnostic Tool. 2. Turn the Ignition ON 3. Check the status of DTC’s (Memorized/Current) 4. Record the DTC & Clear 5. Turn Ignition OFF & ON 6. Verify If DTC U3007 – 16 is present Replace wiring harness (Vehicle side) Check resistance between vehicle ground and ground at the power supply connector. Resistance < 1 Ω? No Yes To Check Continuity
RkJQdWJsaXNoZXIy MTIwNTUz