X2 Eagle ABS DTC Troubleshooting Data Version: 1.0 Date: 03-Dec-15 Author: ERC, Chassis E&E CoC Page: 134 of 154 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Trouble Shooting: START 1. Turn OFF ignition 2. Wait for 5 seconds 3. Turn ON ignition 4. Connect the diagnostics tool and Read Logged DTCs Is U0100–08 logged in current state? Do necessary repairs in the wiring harness. 1. Check if Ignition (Pin 219), Battery (Pin 201, 205 and 203) and Ground (Pin 202, 204 and 206) of ECM ECU is properly connected 2. Check for any blown/disconnected fuse at ignition and battery lines of ECM connector Is continuity there? 1. Check for continuity between ECM CAN_H (Pin 248) to IPC CAN_H (Pin 5) & ECM CAN_L (Pin 247) to IPC CAN_L (Pin 4) in vehicle wiring side connector Do necessary repairs in the wiring harness. Clear DTC STOP Y Y N (In History) N
RkJQdWJsaXNoZXIy MTIwNTUz