Vehicle Platform: OSPREY / AMP ECU Name: PEPS DTC Troubleshooting Data Version: 1.2 Date: 29 Mar 2017 Author: Rajasekhara Reddy Page: 225 of 369 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. B1018 – 11:- Control signal for Ignition Relay Output – Short to Ground Overview:- ISO Code (DTC Code) B1018 - 11 Customer Symptom 1. Green color Ignition LED will remain OFF in Ignition power mode. 2. Vehicle will not crank. Fault Effects (On Vehicle) 1. Green color Ignition LED will remain OFF in Ignition power mode. 2. Vehicle will not crank. Lamp Status (If Any) N.A. Fault Detection Condition 1. Permanent short circuit to ground of control signal to Ignition relay output. 2. Wire cut & shorting to ground of Connector-2 / Pin-20 signal. 3. Bending of pin-20 of connector-2 and shorting to adjacent pin. Normal Operating Condition 1. Vehicle battery voltage shall be normal. 2. No fault on control signal to Ignition relay output should be present. 3. Ignition color LED is SSB should be working. Probable Trouble Area 1. Permanent short circuit to ground of control signal to Ignition relay output. 2. Wire cut & shorting to ground of Connector-2 / Pin-20 signal with vehicle body. 3. Bending of pin-20 of connector-2 and shorting to ground pin. 4. Green color LED is SSB is faulty. Healing Condition 1. After fixing short to ground fault on control signal to Ignition relay output, In Accessory power mode amber color LED should turn ON. Table 49:- B1018-11 overview details Component Details:- 1. PEPS ECU. 2. Ignition relay 3. Start/stop button Preliminary Checks:- 1. Check vehicle battery voltage, it should be normal. 2. Check ECU pins for oxidation, bending or damage.
RkJQdWJsaXNoZXIy MTIwNTUz