Q501 4 Cylinder MT Application DTC Troubleshooting Data Version: 0.1 Date: 21-Sep-2018 Prepared By: Mithi Prasad, Sarang Kulkarni, Manish Gupta Checked By: Yogesh Jadhav Approved By: Satish Kumar P Page: 317 of 1052 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Trouble Shooting: Step Checks IF YES IF NO 1. Check for any other faults presence related to ECU Internal power supplies. Follow rectification process for the faults, before proceeding further Go to Step 2 2 Check engine oil level low Go to step3 Go to step 7 3 Fill the engine oil and clear the DTC. Go to step 4 Go to step 5 4 Conduct the oil reset routine Go to step 5 5 Fault Still Persists? If Fault still persists then Call Hot line. Follow the steps again for reconfirmation DTC’s confirmation: After rectification, Test Drive the vehicle for 2 KM and ensure that no DTC’s are logged in ECM. Circuit Schematic: NA Component Location & Image:- NA Connector View & Information: - NA
RkJQdWJsaXNoZXIy MTIwNTUz