Vehicle Platform: OSPREY / AMP ECU Name: PEPS DTC Troubleshooting Data Version: 1.2 Date: 29 Mar 2017 Author: Rajasekhara Reddy Page: 197 of 369 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Trouble Shooting:- Start 1. Keep vehicle in static condition. 2. Turn IGN ON. 3. Keep UID outside the vehicle. 4. Release clutch pedal. 5. Run input switch test routine. 6. Give clutch pedal transition. i.e press and release. 7. Wait for routine to complete. Is DTC-1642-12 Present ? Check & Fix for the cut & short to Battery on the harness between wire of connector-2 / pin-2 and brake signal. Stop No Yes DTC’s confirmation:- 1. If short to battery fault was created on the driver door handle switch and input switch test routine was executed. Circuit Schematic Diagram:- N.A
RkJQdWJsaXNoZXIy MTIwNTUz