Vehicle Platform: OSPREY / AMP ECU Name: PEPS DTC Troubleshooting Data Version: 1.2 Date: 29 Mar 2017 Author: Rajasekhara Reddy Page: 113 of 369 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. B1639–31:- Vehicle Immobilizer Control Module – No Signal Overview:- ISO Code (DTC Code) B1639-31 Customer Symptom 1. On cranking the vehicle Engine is not starting And 2. Immo telltale on instrument cluster stays ON after IGN ON. Fault Effects (On Vehicle) 1. On cranking the vehicle Engine will not start And 2. Immo telltale on instrument cluster will stays ON after IGN ON. Lamp Status (If Any) Immo telltale lamp on instrument cluster will stays ON continuously after IGN ON. Fault Detection Condition On IGN ON EMS sends key authentication request to PEPS, if no key authentication request is received, PEPS logs this DTC. Normal Operating Condition 1. On cranking the vehicle engine shall start seamlessly And 2. After IGN ON Immo telltale on instrument cluster shall stays OFF. Probable Trouble Area 1. CAN connections between PEPS & EMS And 2. Battery voltage Healing Condition Ignition Transition:- IGN OFF IGN ON. On IGN ON after EMS key authentication request no DTC is logged by PEPS. Table 25:- B1639- 31 overview details Component Details:- 1. PEPS ECU 2. EMS ECU Preliminary Checks:- Check respective ECU pins for oxidation, bending, & damage.
RkJQdWJsaXNoZXIy MTIwNTUz