Vehicle Platform: OSPREY / AMP ECU Name: PEPS DTC Troubleshooting Data Version: 1.2 Date: 29 Mar 2017 Author: Rajasekhara Reddy Page: 94 of 369 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. B164A - 14:- IGN Relay Feedback - circuit short to ground or open Overview:- ISO Code (DTC Code) B164A – 14 Customer Symptom 1. Vehicle will not start. 2. Green color led will not appear of engine start/stop button during ignition cycle. Fault Effects (On Vehicle) 1. Vehicle will not start. 2. Green color led will not appear of engine start/stop button during ignition cycle. Lamp Status (If Any) 1. Immo telltale will always keep on blinking and will never turn-off or steady ON. Fault Detection Condition During IGN ON or cranking the vehicle. Normal Operating Condition During IGN cycle, LED color should change in sequence of LED OFF - Amber ON – Green ON – LED OFF with every press of the Engine start/stop button Probable Trouble Area 1. Permanent short of output of ignition relay. 2. Ignition relay feedback line between PEPS ecu pin-19 and vehicle ground signal. Healing Condition IGN OFF ON Table21:- B164A- 14 overview details Component Details:- 1. PEPS ECU. 2. Ignition relay. Preliminary Checks:- 1. Check Battery Voltage (9V-16V) . 2. Check ECU pins for oxidation, bending & damage.
RkJQdWJsaXNoZXIy MTIwNTUz