Vehicle Platform: OSPREY / AMP ECU Name: PEPS DTC Troubleshooting Data Version: 1.2 Date: 29 Mar 2017 Author: Rajasekhara Reddy Page: 45 of 369 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. A B Perform the visual check of Start Stop switch mating connectors for pin bend or damaged etc. Is connector faulty? Correct connector fault at Start stop switch mating connector (Terminal Bend) Yes Check continuity between Start stop Switch terminal [Pin no.1] and Battery Supply. (Please refer the Start stop switch drawings) No Continuity Found? 1. Start stop switch is faulty 2. Replace Start stop switch Yes PEPS ECU Faulty No Replace PEPS ECU DTC’s confirmation:- After rectification, ensure the following points by using TML diagnostic tool before handing over to customer. a) Run Input Switch Test routine, operate switches manually and check, DTC B101A – 12 should not be returned with the Routine results. Circuit Schematic Diagram:-
RkJQdWJsaXNoZXIy MTIwNTUz