X2 Eagle ESP DTC Troubleshooting Data Version: 1.0 Date: 23-Oct-15 Author: ERC, Chassis E&E CoC Page: 166 of 224 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Trouble Shooting: START 1. Turn OFF ignition 2. Wait for 5 seconds 3. Turn ON ignition 4. Connect the diagnostics tool and Read Logged DTCs Is C102B-64 logged in current state? 1. Check for any Open circuit/Short Circuit/Loose connection in Clutch switch wiring harness. Fix if any fault is found. 2. Turn Ignition Off, wait for 5 seconds and turn ignition On. Replace Clutch switch (While replacing, make sure that ECU voltage supply/ignition is Off) Clear DTC STOP Y N (In History) Is C102B-64 still logged in current state? N (In History) Y
RkJQdWJsaXNoZXIy MTIwNTUz