Vehicle Platform: NEXON ECU Name: ESCL DTC Troubleshooting Data Version: 1.4 Date: 09 Jan 2018 Author: Hitesh Kaneria Page: 56 of 88 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Troubleshooting: DTC’s confirmation: After rectification, ensure the following points before handing over the system to the customer 1. Battery Voltage is between 9 to 16V. 2. Replacement of ECU. 3. Drive the vehicle on road and check the assistance. Circuit Schematic Diagram: NA Component Location & Image: NA Connector Location: NA Connector View & Information: NA Inspection Method: NA Re set the ECU ( Remove the power plug from ECU and reconnect after about 5 minutes ) Yes No I s DTC still present? Stop Replace the ECU. Is DTC Present? Yes No Stop 1 . Connect the TML Diagnostic Tool . 2 . Turn the Ignition ON 3 . Check the status of DTC’s (Memorized/Current) 4 . Record the DTC & Clear . Turn Ignition OFF & ON 5 . Verify If 6 B1021 – 42is present
RkJQdWJsaXNoZXIy MTIwNTUz