Vehicle Platform: OSPREY ECU Name: Hella Body Control Module (BCM) DTC Troubleshooting Data Version: 1.4 Date: 15 May 2018 Author: Body CoC Page: 839 of 855 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. B2265- 5:- Rain Sensor Calibration error Overview: ISO Code B2265-5 Customer Symptom RLS functionality will probably not function or will function intermittently or partially Fault Effects (On Vehicle) RLS will probably not function. Lamp Status (If Any) None Fault Detection Condition - Normal Operating Condition Wiper gets activated based on RLS sensor input to BCM. Probable Trouble Area Vehicle electrical, RLS mounting fault Healing Condition N/A Component Details: If RLS detects the intensity of rain based on threshold values. BCM shall then activate the auto wipe function as per signals from rain sensor. Preliminary Checks: 1. Voltage at the battery terminals should be greater than 11.5V. 2. RLS power supply connector should have greater than 11.5V for full assistance. 3. Check battery cable and RLS connector terminals for damage. 4. Check RLS for pin bend/damage.
RkJQdWJsaXNoZXIy MTIwNTUz