Vehicle Platform: OSPREY ECU Name: Hella Body Control Module (BCM) DTC Troubleshooting Data Version: 1.4 Date: 15 May 2018 Author: Body CoC Page: 711 of 855 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. U1016- 14: Control Module Output Power 1- Circuit Short to Ground/ Open ISO Code (DTC Code) U1016-14 Customer Symptom No immediate symptoms Fault Effects (On Vehicle) Components supplied by internal_5V do not operate. Lamp Status (If Any) NA Fault Detection Condition This fault will logged with IGN ON/ RUN and Internal 5V output from BCM supplied to cockpit dimming switch is not activated. Normal Operating Condition IGN ON/ RUN, Internal 5V output from BCM supplied to cockpit dimming switch is activated and No DTC logged. Probable Trouble Area 1. BCM connector Fault. 2. Harness issue. 3. Switch fault. 4. ECU fault. Healing Condition 1. Give ignition cycle after fault removal 2. Clear DTC command- No DTC logged Component Details: Internal 5V output from BCM supplied to cockpit dimming switch. Preliminary Checks: 1. Check Battery Voltage (9V-16V) 2. Check ECU pins for oxidation, bending & damage.
RkJQdWJsaXNoZXIy MTIwNTUz