Vehicle Platform: OSPREY ECU Name: Hella Body Control Module (BCM) DTC Troubleshooting Data Version: 1.4 Date: 15 May 2018 Author: Body CoC Page: 645 of 855 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. A Is connector faulty? Check continuity between BCM connector pin[C2-11] and BCM ground pin[C1-34/C1-47]. Continuity found? 1. Remove Rear left turn indicator LED matting connector. 2. Perform visual check of connector for pins bend or damaged etc. Is connector faulty? LED faulty? BCM ECU faulty Replace BCM ECU 1. Replace rear left turn indicator LED. Correct connector fault(Terminals bend) Correct BCM side wiring harness.(Short to ground) Correct connector fault(Terminals bend) B YES YES YES YES NO NO NO NO B2269– 11 : Rear Left Turn Indicator LEDs – circuit short to ground Check the LED is faulty
RkJQdWJsaXNoZXIy MTIwNTUz