Vehicle Platform: OSPREY ECU Name: Hella Body Control Module (BCM) DTC Troubleshooting Data Version: 1.4 Date: 15 May 2018 Author: Body CoC Page: 586 of 855 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. 1. Remove Rear wiper mating connector 2. Perform visual check of connectors for pin bend or damaged etc. Connector Faulty? Correct Connector fault (Terminal Bend) BCM ECU Faluty Replace BCM ECU YES NO Check if Rear wiper park position wire [wiring harness side] is shorted to ground Park Switch Faulty? 1.Remove all BCM connectors 2.Take out rear wiper Park position wire [C1-5] from BCM connector 3.Reconnect all connectors 4.Check if rear wiper Park position is proper. rear wiper On and Park input proper? Reconnect all connectors firmly YES NO YES NO A B B223E -92: Rear Wiper Park position signal - performance or incorrect operation Replace rear wiper motor assembly
RkJQdWJsaXNoZXIy MTIwNTUz