Vehicle Platform: OSPREY ECU Name: Hella Body Control Module (BCM) DTC Troubleshooting Data Version: 1.4 Date: 15 May 2018 Author: Body CoC Page: 484 of 855 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Trouble Shooting:- Start Turn IGN OFF – ON and wait for 5 seconds Clear DTCs from BCM ECU Turn IGN OFF – ON and Start the Engine. Make sure engine is running with above 600 rpm. Press Rear Defogger switch either on the FACIA switch bank or on FATC control panel. Wait for 5 seconds. Read DTCs from BCM ECU Is B221E - 11 DTC present Yes Connect the vehicle battery, BCM, and components, if disconnected. Measure Battery Voltage Is battery voltage in range (9V to 16V) Yes Stop No Charge the battery and/or replace battery No B A
RkJQdWJsaXNoZXIy MTIwNTUz